Atlas stunned the industry with the introduction of what is probably the highest performance interconnect and speaker cable available at it's price; a cable researched, designed and developed in Scotland by Atlas: The Atlas Mavros.
That was just the beginning, Atlas are now proud to reveal the extraordinary Atlas Asimi interconnect. Building on the work that led to the Mavros design, the Asimi adopts the same world-leading construction, but with the added benefits of pure silver conductors, manufactured using the highest-quality technique for drawing pure silver. "Ohno Continuous Cast" or OCC, used in the manufacture of high quality Atlas copper cables, increases conductivity of the material, in this case pure silver, by ensuring that there is less than one grain or signal deleting crystal boundary in about 700 feet of conductor! OCC silver allows the signal to travel through a continuous conductor instead os traversing repeated grain boundaries - in other words, the signal has a faster, cleaner and more direct path to follow.
Atlas' attention was once again focussed on the coating that insulates and protects the silver. The Asimi has these conductors enveloped in their new microporous Teflon dielectric. This new air spaced foam improves on the performance of the best solid teflon or PTFE insulators, by providing a 30% greater signal velocity and better integrity, particularly in the area of high frequency delivery. This is achieved because the new material has a dielectric constant of around 1.5 - significantly better than the 2.1 achieved by the more typical PTFE insulators which up to now were the best available in HiFi or audio/visual applications.
The Asimi interconnect is supplied terminated with the Atlas OCC solder free XLR connectors.
The construction of the Asimi silver interconnect cable consists of a pair of conductors, each made up from six bundles of 12 multi conductor wires plus a thicker wire in the centre. Each bundle of conductors is insulated with a layer of microporous Teflon and surrounded by a FPE (Mylar) jacket which in turn is covered by a continuous Copper-Mylar electrostatic screen and a silver plated copper close weave shielding braid ensuring the minimal pick up of RF interference and noise. The outer sheath is made from hard wearing PVC covered by a decorative silver/white woven cotton.
Atlas Asimi XLR to XLR Details:
- Directional, symmetrical pseudo-balanced
Double shielded with copper mylar plus close lapped 99.9997% pure OCC silver multi-stranded screen providing 100% coverage for the avoidance of RFI
- Cotton filler for reduced microphony
- Twin concentric rope-lay stranded 99.9997% pure OCC silver multi-stranded conductors laid in a twisted fashion to reduce EMI and the effects of increased resistance from the proximity effect
- Microporous PTFE dielectrics to both conductors
- 8.5mm diameter with a soft PVC jacket and white woven fabric protective cover
- Direct silver plated OCC copper XLR plugs
- Resistance (Ω/m @ 27°C): 0.0181
- Conductor to screen capacitance (pF/m) : 112.52
- Inter-conductor capacitance (pF/m) : 50.17
- Conductor - screen inductance (µH/m @ 1 kHz) : 0.3496
- Conductor - conductor inductance (µH/m @ 1 kHz) : 0.7162
- Atlas XLR plugs are wired as follows: Pin 1 = Ground, Pin 2 = Hot, Pin 3 = Cold
This Atlas product is not available for online ordering. However, if you call us on 01903 210212 we can discuss your requirements and help you to order the Atlas product that suits your system.