Search by

Isotek Mira LCD/Plasma Mains Conditioner

Only £275.00 Email a Friend	Enlarge this image More Mains conditioning More Isotek products More Isotek Mains conditioning

Options:

The IsoTek Mira is simple to use – first, plug the power cable from your TV or projector into the appropriate socket on the Mira, instead of into the wall socket. Next, if you have a DVD player or set-top box, plug that into the Mira’s second socket. If you’re using a roof aerial or satellite dish, plug that in too. Finally, plug the Mira into a wall socket using a suitable mains cable...and you’re ready to roll!

Mira’s attractive, compact, extruded aluminum case may be placed anywhere that's convenient – on a shelf, behind the TV, or even mounted on a wall using the supplied brackets.

On the top of the Mira you will notice two dedicated sockets, one for display devices labelled "Visual Outlet" and the other "Component Outlet". The Visual outlet should be used for display devices such as TVs and projectors, etc.

The Mira has a Component socket for a set-top box, DVD player, etc. There is no danger to equipment if inadvertently the wrong socket is used, however, full performance will not be achieved; therefore please ensure correct connection.

Not only does the Mira offer protection for display devices and components, but it also offers a full aerial protection system, connected using 75-ohm F connectors. The incoming coaxial cable should be connected to the Mira, and a short length of similar cable to the television equipment. The cable from the wall socket to the Mira must be of the 3-pin plug type, for example, it MUST have earth. Two pin plug types will disconnect the protection circuit.

IsoTek Mira LCD/Plasma Mains Conditioner Details: